WiFi Smart 100dB Sound and Light Flood Alarm, Water Leakage Monitoring, Low Water Level Monitoring, Remote Control Timing Detection, Arming/disarming, Low Battery Alert, 0.8m Long Cord

This is a WiFi water leak sensor alarm is a dual-band link that can be linked with Bluetooth in one click, without the need for a step-by-step procedure, and can also be linked with WiFi.
Protect your home from leaks and water damage all day long. When a water leak is detected, the buzzer will sound a 100 dB alarm and the LED light will flash rapidly, then you can take steps to deal with it and avoid property damage in time.
Note: Only 2.4G WiFi is supported. 5G WiFi is not supported.
See the manual for details
Function key introduction:
A: Short press once to arm “Di”
B: Short press once to disarm “Didi”
C: Press and hold for 6 seconds,and the indicator flashes in the distribution network.
Arm: turn on monitoring
disarm: turn off monitoring
Low water level/leakage detection switch：
Water leakage monitoring (factory default)
Low water level monitoring (move to H direction for setting)
How to Network with mobile phone:
① Connect to mobile phone Wi-Fi (2.4G frequency) / turn on BT.
② Operating the product.
Long press the setting key for about 6 seconds.
The LED light flashes continuously.
③ Click “Add Device”.
④ Discover the device, click “Add”.
⑤ Show adding. Show adding.
⑥ The addition is complete, click “Next”.
⑦ Click “Done”.
Technical parameter
Working voltage: DC3V
Standby current: ≤ 180uA
Alarm current: ≤ 70mA
Alarm sound: ≤ 80dB (within Im)
Battery : LR03 AAA (2*1.5V)
WiFi: IEEE 802.11 b/g/n 2.4G