Kidde Nighthawk Carbon Monoxide Detector, AC-Plug-in with Battery Backup, Digital Display & Smoke Detector, Battery Powered, Smoke Alarm

Kidde Nighthawk Carbon Monoxide Detector, AC-Plug-In with Battery Backup, Digital Display
The Kidde Carbon Monoxide Detector, AC Plug-In with Battery Backup, Digital Display, model KN-COPP-3, features ionization sensing technology to protect you & your family from the dangers of carbon monoxide. Operating with an AC Plug-In that can be easily installed in any AC wall outlets and a 9V battery backup, the CO detector provides continuous protection from carbon monoxide, even during power outages. A red dot will appear in the lower, right corner of the CO alarm to indicate that the CO detector is operating normally. When the CO alarm detects carbon monoxide gas, 4 beeps will sound & a number reading will appear on the digital display that measures the CO concentration. These CO levels will be stored it the detectors memory until its reset. The digital display also provides a low battery warning by sounding 1 alarm per minute and displaying “Lb” on the screen. For whole home family protection, place 1 carbon monoxide detector on each level of your home & in your bedroom. UL Certified with a 10-year limited warranty. Meets requirements of UL 2034.
The leading cause of accidental poisoning deaths in North America, Carbon Monoxide is odorless, tasteless and invisible, it’s a silent killer. Kidde CO alarms include the most accurate sensing technology available, the patented Nighthawk electrochemical sensor. This alarm can be mounted three ways: plug directly into AC receptacle, mount on tabletop using 8 foot power cord, or wall-mount. The digital readout continuously displays carbon monoxide levels from 30-999 parts per million. This unit has a loud, 85-decibel alarm that sounds when CO reaches dangerous levels. One of the features of this product is peak level memory, which means this unit will recall highest level of CO present since previous reset. Install at least one CO alarm on every floor and in sleeping areas. Make sure CO alarms are at least 15 feet away from cooking or heating appliances to prevent false alarms. Replace CO alarms every 5 to 7 years to benefit from the latest technology upgrades.

Kidde Smoke Detector, Battery Powered, Smoke Alarm
The Kidde Smoke Detector, Battery Powered, model i9030, features ionization sensor technology to protect you & your family from the dangers of smoke & fire. Operating on a single, 9-volt alkaline battery, the smoke alarm provides continuous protection from smoke or fire, even during power outages. To ensure proper installation, the test/silence button will electronically simulate the presence of smoke and cause the unit to alarm. After 10 years, the smoke alarm will need to be disposed & replaced. UL Certified with a 3-year limited warranty. Meets requirements of UL217, NFPA72, The State of California Fire Marshall, NFPA 101, & FHA.
70-Percent of all home fire deaths occur in homes with no alarms or no working alarms, and nearly one quarter of smoke alarms in reported fires are not working. Battery operated Ionization smoke alarms are designed to help protect you and your family from the dangers of fire. This model is powered by a 9V battery, providing continuous protection, even during power outages. The tamper resist feature makes your smoke alarm somewhat tamper resistant. Install UL listed smoke alarms on every floor of your home, in hallways, inside bedrooms and outside of sleeping areas. Replace smoke alarms every 10 years. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than Photoelectric alarms. Studies show both types will effectively detect either type of fire. For optimal protection, install both smoke alarm technologies in your home.