Kidde Hardwire Carbon Monoxide Alarm with Digital Display and Peak Level Memory 5.75 Diameter x 1.8 Depth & Smoke Detector, Hardwired Smoke Alarm with Battery Backup & Interconnect Capability

Kidde Hardwire Carbon Monoxide Alarm with Digital Display and Peak Level Memory 5.75 diameter x 1.8 depth
The Kidde Smoke and Carbon Monoxide Detector, Hardwired Interconnect Combination Smoke and CO Alarm with Battery Backup and Voice Alert, model KN-COPE-IC, is an AC-wired, photoelectric alarm operates on a 120VAC power source with a 9V battery backup. Using photoelectric sensor technology, the wired smoke alarm detects smoke and fire. This fire alarm also includes the world’s most accurate CO sensing technology based on claims by major manufacturers. A red LED will flash in unison with the voice alarm that warns of fire, carbon monoxide, and low battery. The Smart Hush feature silences the fire alarm for approximately 8 minutes. The green LED on the alarm will flash every 2 seconds when Smart Hush is activated and canceled. A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement, but cannot exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms. With 18 initiating devices (smoke, heat, CO, etc.), interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. UL Certified with a 10-year limited warranty. Meets requirements of UL 2034, UL217, NFPA72, The State of California Fire Marshall, NFPA 101, FHA, and HUD.
The leading cause of accidental poisoning deaths in North America, Carbon Monoxide is odorless, tasteless and invisible. It is a silent killer. The Kidde KN-COP-IC Hardwire Carbon Monoxide Alarm with Battery Backup and Digital Display includes the most accurate sensing technology available, the patented Nighthawk electrochemical sensor. This Kidde hardwired alarm is an essential device designed to protect you and your family from the dangers of carbon monoxide in your home. The digital display feature allows constant monitoring of carbon monoxide levels and updates every 15 seconds to let you know if levels change. The peak level memory feature displays the highest CO level measured since the last reset. The 9V battery back up provides continuous monitoring of carbon monoxide levels even during a power failure. It includes a smart interconnectable system. This system enables the unit to alarm in a carbon monoxide pattern and sound a different pattern when interconnected to a Kidde smoke alarm that is in alarm mode.

Kidde Smoke Detector, Hardwired Smoke Alarm with Battery Backup & Interconnect Capability
The Kidde Smoke Detector, Hardwired Smoke Alarm with Battery Backup & Interconnect Capability, model i12040A, is an AC/DC powered, ionization smoke detector that is hardwired into a home’s 120V power and includes a 9V battery backup. This smoke alarm uses ionization sensing technology, which may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fire that can occur within the home. Designed to be mounted easily, the smoke detector has a large mounting base, pre-stripped wiring harness with easy-off cap, and a front battery pull tab so you can activate the battery without removing the alarm from the mounting bracket.
Red and green LEDs on the smoke detector indicate the alarm’s status, with green indicating the unit has AC power. The red LED indicates the alarm condition, including standby, alarm, memory, or Hush mode. This hardwired smoke alarm is also available in 2-pack, as well as a 6-piece bulk pack for contractors and property owners. The unit is a UL Listed product with a 10-year limited warranty.
A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement, but cannot exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms. With 18 initiating devices (smoke, heat, CO, etc.), interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. Meets requirements of UL217, NFPA72, The State of California Fire Marshal, NFPA 101 (One and two family dwellings), Federal Housing Authority (FHA), and Housing and Urban Development (HUD).