Kidde Hardwire Carbon Monoxide Alarm with Digital Display and Peak Level Memory 5.75 Diameter x 1.8 Depth & Heat Detector, Hardwired with Battery Backup & 2 LEDs, Interconnectable

Kidde Hardwire Carbon Monoxide Alarm with Digital Display and Peak Level Memory 5.75 diameter x 1.8 depth
The Kidde Smoke and Carbon Monoxide Detector, Hardwired Interconnect Combination Smoke and CO Alarm with Battery Backup and Voice Alert, model KN-COPE-IC, is an AC-wired, photoelectric alarm operates on a 120VAC power source with a 9V battery backup. Using photoelectric sensor technology, the wired smoke alarm detects smoke and fire. This fire alarm also includes the world’s most accurate CO sensing technology based on claims by major manufacturers. A red LED will flash in unison with the voice alarm that warns of fire, carbon monoxide, and low battery. The Smart Hush feature silences the fire alarm for approximately 8 minutes. The green LED on the alarm will flash every 2 seconds when Smart Hush is activated and canceled. A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement, but cannot exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms. With 18 initiating devices (smoke, heat, CO, etc.), interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. UL Certified with a 10-year limited warranty. Meets requirements of UL 2034, UL217, NFPA72, The State of California Fire Marshall, NFPA 101, FHA, and HUD.
The leading cause of accidental poisoning deaths in North America, Carbon Monoxide is odorless, tasteless and invisible. It is a silent killer. The Kidde KN-COP-IC Hardwire Carbon Monoxide Alarm with Battery Backup and Digital Display includes the most accurate sensing technology available, the patented Nighthawk electrochemical sensor. This Kidde hardwired alarm is an essential device designed to protect you and your family from the dangers of carbon monoxide in your home. The digital display feature allows constant monitoring of carbon monoxide levels and updates every 15 seconds to let you know if levels change. The peak level memory feature displays the highest CO level measured since the last reset. The 9V battery back up provides continuous monitoring of carbon monoxide levels even during a power failure. It includes a smart interconnectable system. This system enables the unit to alarm in a carbon monoxide pattern and sound a different pattern when interconnected to a Kidde smoke alarm that is in alarm mode.

Kidde Heat Detector, Hardwired with Battery Backup & 2 LEDs, Interconnectable
The Kidde Heat Detector, Hardwired with Battery Backup & 2 LEDs, Interconnectable (model HD135F) is an AC/DC powered heat alarm that operates on your home’s 120V power source. In the event of a power failure, the Kidde heat alarm comes equipped with a 9V battery backup. Using heat sensing technology, the wired heat alarm detects temperatures rising above 135⁰ Fahrenheit, alerting homeowners to dangerous temperatures unlike a smoke alarm, which only detects smoke. Heat detectors are recommended for areas where a smoke alarm may not be appropriate, such as in a kitchen, garage, attic, or other area where smoke or dust may set off a false alarm on a smoke detector. Installing both smoke and heat detectors in a home can provide extra protection while triggering fewer nuisance alerts.
The heat alarm includes a quick connect power harness to make installation fast and easy. An 85-decibel alarm sounds when the high temp sensor detects elevated heat conditions. Two LEDs indicate the heat sensor alarm’s status: a green LED is constantly ‘on’ when AC power is present, and a red LED will flash every 30-40 seconds to indicate that the heat alarm is operating properly; the red LED and will flash rapidly when the unit is sounding until air temperature is reduced. The Kidde heat detector can be used as a single unit or interconnected with up to 24 Kidde devices (18 of which can be initiating) in a multiple station arrangement. UL Certified with a 5-year limited warranty. Meets requirements of UL217, NFPA72, The State of California Fire Marshal, NFPA 101 (one- and two-family dwellings), FHA, and HUD.
The Kidde 120-Volt AC Hardwire Heat Alarm gives you and your family an early warning to dangerous temperatures of 135-Degree F or more. This unit can be used as a single station unit or it can be interconnected to up to 24 Kidde devices in a multiple station arrangement. The interconnect system should not exceed the NFPA interconnect limit of 12 smoke alarms and or 18 initiation alarms. The heat detector includes a tamper resist pin to help deter tampering or theft.