Kidde Hardwired Smoke & Carbon Monoxide Detector, Battery Backup, Interconnectable, LED Warning Light Indicators, 4 Pack & Smoke Detector, Hardwired Smoke Alarm with Battery Backup Included, Pack of 6

Kidde Hardwired Smoke & Carbon Monoxide Detector, Battery Backup, Interconnectable, LED Warning Light Indicators, 4 Pack
Kidde Hardwired Smoke & Carbon Monoxide Detector, AA Battery Backup, Interconnectable, LED Warning Light Indicators, model 900-CUDR, is an alarm combo that detects smoke, fire, & carbon monoxide gas, using a single alarm. It connects to your home’s wiring (120V AC power), while 2-AA batteries (included) provide battery backup during the event of a power failure. The Kidde Smoke and Carbon Monoxide Alarm is equipped with self-testing components that are always checking the unit to ensure the device is operating as expected*. In the event of a smoke or carbon monoxide event, an 85-decibel alarm will sound & LED light warning indicators will alert you to various statuses: green indicates normal operation, amber indicates there is an operating error, and red indicates a smoke, fire, or carbon monoxide incident. The Kidde Smoke & Carbon Monoxide alarm uses photoelectric sensors that detect visible fire particles associated with slow smoldering fires, as well as an electrochemical carbon monoxide sensor, which offers accurate readings of CO. The Whole-Home Activation features expand via the hardwired 120V AC connections to other Kidde smoke alarm, so when one alarm sounds, they all do*. The test-hush button alows testing of the alarm, while the hush button allows for temporary silence of the alarm when a nuisance, or “false” alarm sounds from events like routine cooking or shower steam. When the alarm is nearing its end of life, it will begin to chirp. Place a smoke detector and carbon monoxide detector on each level of your home, in hallways, and inside each bedroom. UL Certified with a 10-year limited manufacturer’s warranty on the alarm. Meets requirements of UL 2034, UL217, NFPA72, NFPA 101, FHA, & HUD. *Self-testing is not a substitute for a manual push test of the alarm. Perform a button test once per week to verify proper alarm operation. **Alarms only connect with select Kidde alarms that have hardwired AC interconnect capability (see User Guide).

Kidde Smoke Detector, Hardwired Smoke Alarm with Battery Backup Included, Interconnect, Pack of 6
The Kidde i12040A is an AC/DC powered, ionization smoke detector that is hardwired into a home’s 120V power and includes a 9V battery backup (included). This smoke alarm uses ionization sensing technology, which may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fire that can occur within the home. Designed to be mounted easily, the smoke detector has a large mounting base, pre-stripped wiring harness with easy off cap, and a front battery pull tab so you can activate the battery without removing the alarm from the mounting bracket.
Red and green LED lights on the smoke detector indicate the alarm’s status, with green indicating the unit has AC power. The red LED indicates the alarm condition, including standby, alarm, memory, or Hush™ Mode. This hardwired smoke alarm is available in a 6-piece bulk pack for contractors and property owners. UL Listed product with a 10-year limited warranty.
A maximum of 24 Kidde devices can be interconnected in a multiple station arrangement, but cannot exceed the NFPA (National Fire Protection Association) limit of 18 initiation devices, of which 12 can be smoke alarms. With 18 initiating devices (smoke, heat, CO, etc.), interconnected, it is still possible to interconnect 6 strobe lights and or relay modules. Meets requirements of UL217, NFPA72, The State of California Fire Marshall, NFPA 101 (One and two family dwellings), Federal Housing Authority (FHA), and Housing and Urban Development (HUD).