Kidde Hardwired Smoke & Carbon Monoxide Detector, AA Battery Backup, Interconnectable & Smoke Detector, Hardwired Smoke Alarm with Battery Backup, Front-Load Battery Door, Test-Silence Button, White

Kidde Hardwired Smoke & Carbon Monoxide Detector, AA Battery Backup, Interconnectable, LED Warning Light Indicators, 2 Pack
Kidde Hardwired Smoke & Carbon Monoxide Detector, AA Battery Backup, Interconnectable, LED Warning Light Indicators, model 900-CUDR, is an alarm combo that detects smoke, fire, & carbon monoxide gas, using a single alarm. It connects to your home’s wiring (120V AC power), while 2-AA batteries (included) provide battery backup during the event of a power failure. The Kidde Smoke and Carbon Monoxide Alarm is equipped with self-testing components that are always checking the unit to ensure the device is operating as expected*. In the event of a smoke or carbon monoxide event, an 85-decibel alarm will sound & LED light warning indicators will alert you to various statuses: green indicates normal operation, amber indicates there is an operating error, and red indicates a smoke, fire, or carbon monoxide incident. The Kidde Smoke & Carbon Monoxide alarm uses photoelectric sensors that detect visible fire particles associated with slow smoldering fires, as well as an electrochemical carbon monoxide sensor, which offers accurate readings of CO. The Whole-Home Activation features expand via the hardwired 120V AC connections to other Kidde smoke alarm, so when one alarm sounds, they all do*. The test-hush button alows testing of the alarm, while the hush button allows for temporary silence of the alarm when a nuisance, or “false” alarm sounds from events like routine cooking or shower steam. When the alarm is nearing its end of life, it will begin to chirp. Place a smoke detector and carbon monoxide detector on each level of your home, in hallways, and inside each bedroom. UL Certified with a 10-year limited manufacturer’s warranty on the alarm. Meets requirements of UL 2034, UL217, NFPA72, NFPA 101, FHA, & HUD. *Self-testing is not a substitute for a manual push test of the alarm. Perform a button test once per week to verify proper alarm operation. **Alarms only connect with select Kidde alarms that have hardwired AC interconnect capability (see User Guide).

Kidde Smoke Detector, Hardwired Smoke Alarm with Battery Backup, Front-Load Battery Door, Test-Silence Button,(Pack of 2) White
Kidde Smoke Detector, Hardwired Smoke Alarm with Battery Backup, Front-Load Battery Door, Test-Silence Button, Pack of 2, model i12060A, is an AC/DC powered, ionization smoke alarm that operates on a 120V power source. In the event of a power outage, the Kidde fire alarm comes equipped with a 9V battery backup. Using ionization sensing technology, the wired smoke alarm detects invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fire that can occur within the home.
Easy to install, this Kidde smoke detector includes a pre-stripped wiring harness with easy-off cap. The front battery door makes it simple to replace the smoke alarm’s battery backup without the need to remove the alarm from the mounting bracket. Red LEDs indicate 4 modes of operation: Standby Mode – flashes every 40 seconds to indicate the smoke alarm is operating properly; Alarm Mode – alarm senses products of combustion; Alarm Memory – to indicate the alarm has been activated; and Hush mode – silences the alarm for approximately 7 minutes. Green LED indicates AC power.
Kidde Hardwired Smoke Detector model i12060A is also available as a single device, in a four-pack, and in a six-piece bulk pack for contractors and property owners who need an alarm for every room. UL Certified with a 10-year limited warranty. Meets requirements of UL217, NFPA72, The State of California Fire Marshal, NFPA 101, FHA, & HUD.